KeLi D2002E - Page 30

www.kelichina.com Page 30 of 38
9 Vehicle number must be a value between 00001 and 99999. That is to
say 0000 is not a legal vehicle number. If the number is 00000, the third
method is adopted to weigh the goods.
9 If the tare is known already, one time testing is enough to have the full
record.
iv. Detailed steps:
STEP one: input tare (if the value has been existing already, there is no need to
change it so this step can be neglected)
¾ Tare is known
Step Description Display Notes
vehicle
number
setup
Press [Vehicle]
Press[1][2][3][4][5]
Press[Enter]
Under measuring status
[o ]
[o12345]
[o12345]
Display a blank Vehicle NO.
Input Vehicle No. 12345
Confirm to next step
Tare
setup
Press[Preset Tare]
press[0][0][0][5][0][0]
press[Enter]
[o00000]
[o00500]
Back to measuring status
The current tare is 0Kg
Set the tare of NO. 12345
vehicle 500Kg
confirm
¾ Tare is unknown
Step Description Display Notes
Input
vehicle
number
Press[Vehicle]
Press[1][2][3][4][5]
Press[Enter]
Under measuring status
[o ]
[o12345]
[o12345]
Display a blank Vehicle NO.
Input Vehicle No. 12345
Confirm to next step
Set present
weight as
tare
Press[Memory Tare]
Back to measuring
status after seconds
[------------]
Data processing, store the
value to be the tare of vehicle
12345
¾ It displays [ERR 43] while the vehicle NO. is set 00000 at the first step. Press
“ENTER” to be back to measuring status.