5
MECY-MODE
The measuring cycle can be adjusted between
once per second up to once per hour (59:59).
Longer measuring cycles extend the battery life.
Activate MECY.
The display indicates CYCL
and the lower right shows
the time in minutes and se-
conds.
The first digit flashes.
EXE increases the digits
(1, 2,…5).
STEP switches to the next
digit.
The second digit flashes.
EXE increases the digits
(1, 2,…9) etc.
Activating RES programmes the new selected
measuring cycle and switches back to the Mano-
Mode.
If the peak- and trough pressure are displayed,
the time period set here has no meaning. When
set in peak/trough mode, the instrument will
always measure in a 1/2-second interval.
MECY (MEsure CYcle) = Adjusting the measuring cycle.
To Next Page
