To Next PageTo Next Page
Need help?Do you have a question about the Keller LEO 2 and is the answer not in the manual?
General| Accuracy | ±0.1% FS |
|---|---|
| Housing Material | Stainless steel |
| Protection Class | IP65 |
| Display | LCD |
| Power Supply | 3 V battery |
| Temperature Range | -10 to 60 °C |
| Interface | RS485 |
| Media Compatibility | Compatible with most liquids and gases |
| Process Connection | G1/4" or 1/4" NPT |
Describes how to power on the digital manometer and initial display sequence.
Introduces essential operations like RESET, OFF, and MANO modes for device control.
Covers setting new zero points or restoring factory defaults for pressure measurement.
Manages the automatic power-off feature (CONT on/off) for energy saving.
Provides an example procedure for changing the pressure unit, like mbar.
Explains how to briefly view the minimum pressure value during operation.
Covers operational tips, function activation timeouts, and setting retention.
Details display messages for overflow/underflow, overload, and CONT on status.
Notes on temperature impact on display readability and operating limits.
Details the 7/16"-20 UNF thread and the G1/4" swivel fitting for optimal orientation.
Instructions for battery change (CR2430) and information on battery life.
Explains setting pressure values as a new zero reference and factory calibration.
Provides crucial safety guidelines for mounting and operating the digital manometer.
Information on potential residual hydraulic oil in connections for ranges >= 61 bar.
Lists order numbers for accessories like batteries, protective covers, and carrying bags.
Confirms compliance with EU directives (EMC, RoHS) and relevant norms.
