Keller smart slider LD350 - Faults and Troubleshooting; Common Malfunctions and Solutions

05
Operating instructions
smart slider - Operating instructions
05. Faults
5.1 General possible faults
Malfunction Possible cause Solution
Sliding part does not open/close
properly
Obstacle detected See if running way is completely
free of obstacles and dirt
No power Call an qualified technician
No command? Call an qualified technician
Broken control unit Call an qualified technician
Sliding part runs not smoothly Obstacle detected See if running way is completely
free of obstacles and dirt
Mechanical issue Call an qualified technician
Motor moves but sliding part does not Mechanical issue Call an qualified technician
Motor unlocked Lock motordrive (see chapter 2.5
of this manual)
Strange noise during operation Mechanical or electrical issue Call an qualified technician
11
Keller minimal windows
®
| 997-00220 | 05-2022
Keller minimal windows
®