Need help?Do you have a question about the Keller smart slider LD350 and is the answer not in the manual?
General| Brand | Keller |
|---|---|
| Model | smart slider LD350 |
| Category | Door Opening System |
| Language | English |
Essential safety rules and user responsibilities for operating the smart slider system.
Defines the intended horizontal sliding operation and prohibits other uses.
Outlines conditions voiding warranty and limiting liability, including unauthorized changes or misuse.
Explains the electric motor and toothed belt system driving the sliding unit.
Details operation requiring continuous button press until cycle completion.
Describes partial automation where user intervenes for final movement.
Explains full automation initiated by a single button press.
Instructions for disengaging the automatic lock for manual window operation during power failure.
Guidelines for cleaning the motor housing using water and mild polish, avoiding harsh chemicals.
Crucial safety precautions, including power disconnection and personal protective equipment.
Information on checking service intervals as specified by the distributor and recording inspections.
Distinguishes between user-level (monthly) and qualified technician-level (annual) maintenance.
Detailed steps for monthly checks and cleaning that end-users can perform themselves.
Tasks requiring a qualified technician for annual inspection, lubrication, and checks.
Identifies typical problems like non-operation, rough movement, or noise, with causes and remedies.
Procedure for safely disconnecting the installation from the electrical mains.
Safety and preparatory instructions for qualified personnel undertaking disassembly.
Step-by-step instructions for disassembling the system components.
Guidance on separating parts for recycling and responsible waste disposal.
Contact details for the manufacturer, AB-Matic nv.
Template for recording details of the sliding unit, customer, installer, and work performed.
Section for documenting individual maintenance tasks, including technician and customer signatures.
Form confirming product readiness, safety checks, and customer handover with warnings.
Contains information on manual accuracy, liability, copyright, and responsible publisher details.
To Next Page