01
Operating instructions
smart slider - Operating instructions
01. General
1.1 General
1.2 Application
1.3 Warranty and liability
• Completely observe this user manual.
• The automatic sliding section should only be operated by instructed adult persons.
• No people, animals or other objects may be in the moving zone when the automation is being operated.
• When operating the smart slider
®
, it must always be in sight.
• In case of any malfunctions, always call a qualified company or contact the manufacturer.
• Do not make any changes to the smart slider
®
!
• Never put fingers in or on parts of the moving sliding part, side part (sliding part walkway) during any
movement.
• Make sure that the smart slider
®
functions 100% properly and have it checked at least once a year by a
qualified company and have this recorded in writing!
• Visually inspect the smart slider
®
thoroughly at least 1x per month for damage, proper functioning, noise and
all parts are always properly tightened. Also make sure that all rail systems are clean and that the sliding part is
manually correct works.
The smart slider
®
is intended to operate a sliding action completely horizontal automatically.
The smart slider
®
is not allowed to use for other purposes.
In case of personal changes to the smart slider
®
that are not in accordance with this manual, the liability or
warranty is void.
This also applies to damage caused by incorrect operation, unauthorized use or failure to follow the instructions in
this one manual and / or due to poor maintenance of your smart slider
®
system.
3
Keller minimal windows
®
| 997-00220 | 05-2022
Keller minimal windows
®
To Next Page
Loading...
Need help?
General