12 electrical connection Kelvinator Gas Continuous Flow hot water system
Electrical connection
1. The water heater must be electrically grounded. Please
ensure that the earth on the outlet that the supply cord
connects to is wired correctly. If in doubt check the
continuity of the earth at the outlet to the earth stake on
the premises.
2. The water heater requires an AC 240V 50Hz
electrical power supply and draws a current of 0.8A.
3. The water heater must be connected to a weather-proof
power outlet. This outlet shall be no more than 1 meter
from the base of the water heater for easy access.
4. Means for disconnection must be incorporated in the
fixed wiring in accordance with the wiring rules.
5. The insulation of the xed wiring must be protected by
insulating sleeving having an appropriate temperature rating.
6. If the supply cord is to be replaced, this must be done
by a service technician, electrician or similarly qualified
person in accordance with the wiring rules.
Weather-proof power outlet
To Next Page
Loading...
Need help?
General
