To Next PageTo Next PageHow to fix a Kelvinator Air Conditioner that won't start?
If your Kelvinator Air Conditioner doesn't start, there are a couple of things to check: First, ensure the air conditioner plug is fully pushed into the outlet and that the power is switched on. Second, inspect your house's fuse or circuit breaker box, and replace the fuse or reset the breaker if necessary.
Why is my Kelvinator Air Conditioner not cooling properly?
If your Kelvinator Air Conditioner isn't cooling as expected, several factors could be at play. A common cause is a dirty air filter, which should be cleaned at least every two weeks. Also, remember that after turning on the air conditioner, you need to allow time for the room to cool down. Ensure cold air isn't escaping through open furnace floor registers or cold air returns. Finally, check that curtains, blinds, or furniture aren't blocking the front of the unit, restricting airflow.
What to do if my Kelvinator KWH20HRB Air Conditioner fails due to a power outage?
If a power failure occurs, switch off and disconnect / unplug the power cord of your Kelvinator Air Conditioner. When power is restored, reconnect (plug in) the power cord, switch on the power and wait 3 minutes to restart the air conditioner to prevent tripping of the compressor overload.
General| Brand | Kelvinator |
|---|---|
| Model | KWH20HRB |
| Category | Air Conditioner |
| Language | English |
Explains the meaning of warning and caution symbols used in the manual.
Lists actions to avoid to prevent injury or damage.
Lists essential actions for safe operation and maintenance.
Details the electronic control keypad and its functions.
Instructions for operating the power and selecting modes.
Codes indicating malfunctions and troubleshooting steps.
Detailed instructions for using the remote control.
How to set temperature and fan speed.
Overview of the remote control functions.
Explanation of remote control buttons like Power, Mode, Temp.
Guidelines for choosing an optimal installation location.
Troubleshooting steps for when the unit does not start.
Troubleshooting steps for insufficient cooling.
Troubleshooting steps for ice buildup on the unit.
