Kemper Filter-Cell XL - Storage; Operation Scheme; Measurements in case of emergency

5
9. Storage
The separate components as lter unit and accessories should be stored in original packaging. You have to observe during
the storage that the components will not be damaged by any items laid on to of them. The storage place has to be dustfree
andprotected against moisture. The storage temperature should not undergo – 10 °C or exceed + 50 °C constantly.
10. Operation Scheme
11. Measurements in case of emergency
During a re inside the lter unit resp. at its capturing devices you have to follow the following steps:
• Switch off the lter unit at the motor protection switch, if possible.
• Disconnect the lter unit from the power supply by taking off the CEE plug.
• Extinguish the re with a standard re extinguisher.
• If necessary contact the local re brigade to extinguish the re.
Keep in mind:Donotopenthemaintenancedoorincaseofanyre.Dangerofanexplosiveame.
Filter cartridge with
rotating nozzle
Maintenance door
Dust collection container
Impeller wheel
Motor
Motor protection
switch
Drain valve for condensate
Compressed air
connection
Secure valve
Magnetic valve
Polluted air side
Clean air side
Silencer