Kemper Filter-Cell XL - European Community Declaration of Conformity

7
13. European Community Declaration of Conformity
According to the European community machine standard 2006/42/EC
Manufacturer: KEMPER GmbH
Von-Siemens-Str. 20
D-48691 Vreden
Mr. Manfred Könnig is authorized to compile the technical documentation.
We hereby declare that the following machine with all relevant provisions of the EC Machinery Directive 2006/42/EC
in accordance.
Part No.
60 200
Description: KEMPER Filter-Cell XL
The machine is also in accordance with all relevant provisions of the following EC-guidelines:
2006/42/EC Machine safety guideline
2004/108/EC Electromagnetic compatibility
2006/95/EC Low-voltage - guideline
The following harmonized standards (or parts of these standards) were used:
EN ISO 12100 part 1+2, EN 294,
EN 349, EN 418, EN 983 Security of machines
EN 1050 Security of machines - guiding principles for risk evaluation
EN 60204 -1 Electrical equipment of machines
EMVG Law referring to the electromagnetic compatibility of machines
EN 610000-6 part 3 Specialized basic standard noise immunity
EN 610000-6 part 2 Specialized basic standard noise emissions
Thefollowingtechnicalspecications(orpartsofthesestandards)wereused:
VDE 0100 Construction of low-voltage plants
VDE 0113 Electrical equipment of machines - complies to EN 60204-1
UVV BGV A1 Regulations for the prevention of accidents: Principles of prevention
BGR 500 2.26 Weld, cuts and related procedures
DIN 45635 Noise levels at machines
The Annex VIII of Directive 2006/42/EC has been observed. Compliance with the requirements of Low Voltage Directive
has been ensured in accordance with Annex I, point 1.5.1 of Directive 2006/42/EC.
Additional information
This explanation loses its validity, if the machine is not used in proper use and if a change not co-ordinated with the
manufacturer in written form is made.
Vreden, 01.12.2009
KEMPER GmbH
Dipl.-Ing.M. Könning
(Chief Technical Engineer)