Kemper PROFILER Remote - User Manual

Connects the PROFILER Remote to the PROFILER using an ethernet cable for robust connection and automatic initialization.

Browse Performances or scroll through Rigs based on mode and settings.

Select Slots in Performance Mode or Rigs in Browser Mode.

Controls tempo for effects and activates the Beat Scanner for rhythm detection.

Activates Tuner Mode, with an option to mute the signal for silent tuning.

Flexibly assigned to switch effect modules on/off and toggle features within effects.

Assigns switching functions to Effect Buttons by pressing buttons simultaneously.

Reverses current assignments by repeating the original assignment procedure.

Adds multiple effect module assignments to a single Effect Button.

Toggles effect states and stores all assignments with the Rig for recall.

Allows assignments via Rig Settings when the Remote is not physically connected.

Uses Effect Buttons for specific functions like Rotary Speaker or delay freeze.

Details the automatic latched/momentary detection of Effect Button presses.

Explains how Effect Buttons are jointly locked/unlocked with assigned modules.

Describes the functions of the Looper buttons for recording, playback, and overdubbing.

Connects expression pedals and switches via TRS sockets for enhanced control.

Mentions LCD Contrast knob and system settings for managing the remote.

Discusses ethernet cable communication and power supply for longer distances.

Declares product compliance with FCC Rules, subject to specific operating conditions.

Details FCC compliance for digital devices and potential radio interference management.