Kemper Profiling Amplifier - Master button; Master volume knob; Volume knob

KEMPER PROFILING AMPLIFIER20
Master button
(14)
This button brings the master settings, such as “Master volume” and “Output Routing”, into focus. The set-
tings are global and are therefore not saved with the rig. Instead, use local settings to store specific adjust-
ments for dierent clubs, studios or rehearsal rooms.
 A dedicated soft button allows you to disable the speaker emulation for the MONITOR out, should you
wish to connect the KPA directly to a power amp driving a guitar cabinet.
Master volume knob
(15)
“Master Volume” is always global, and therefore not stored with a rig. To control headphone volume, please
use the dedicated soft control in the master section, which can be accessed by pushing the MASTER but-
ton. Changing the volume doesn’t aect the color of sound.
Volume knob
(16)
VOLUME controls the relative volume of a rig, and is stored as a part of it. Use this control to level out vol-
ume dierences between rigs. Again, changing the volume doesn’t aect the color of sound.