Kemper Profiling Amplifier - Back panel overview; Master out section

BACK PANEL OVERVIEW 21
Back panel overview
Now that we’ve gone over the front panel, let’s give you a basic overview of what you’ll find on the back
panel.
Master out section
(1)
This is your MAIN STEREO out. Use these outputs to connect to a mixing desk in a recording studio, or to
the front of house mixer in a live situation. These outputs deliver the entire rig: amp, cabinet and all eects.
The outputs are symmetrical and you have a choice of XLR or quarter-inch jack. Like all ins and outs it of-
fers a GROUND LIFT to prevent a hum loop.
1
2 3
4
5
6
7
8
9