KEMPER ProfiMaster Instruction Manual - EN
Product number: 150 2464 - 59 - rev.: 2
Technical changes and errors reserved.
Status as of: 05/2015
7 Technical Maintenance
The guidelines described in this chapter comply with the minimum requirements.
Depending on the operating conditions, the ProfiMaster device may be subject to
further instructions to keep the instrument in optimal condition.
Maintenance and repair works described in this chapter may only be carried out by
the operator's specially trained service personnel.
The spare parts used shall comply with the technical requirements specified by
KEMPER GmbH.
This is always assured with the original spare parts.
Ensure the safe and environmentally-friendly disposal of operating substances and
replacement parts.
During the service and maintenance works observe:
● Chapter 2.4 Safety instructions for the operating personnel
● Chapter 2.5 Safety instructions for maintenance and troubleshooting
● Special safety instructions indicated for individual activities in this chapter.
To Next Page
Loading...
