To Next Page
C
Cameron MosleyAug 11, 2025
What to do if my Kemppi FastMig Pulse 350 Welding System machine won’t work?
- DDeborah BartonAug 12, 2025
If your Kemppi Welding System machine isn’t working, here are a few things you can check: * Make sure the mains plug is connected. * Ensure the mains power distribution is switched on. * Inspect the mains fuse or circuit breaker. * Verify the power source 0/I switch is in the ON position. * Confirm the interconnection cable set and connectors between the power source and wire feed unit are correctly fastened, referring to the manual schematic if needed. * Check that the earth return lead is connected. * Ensure the function panels are switched on by pressing the orange buttons on the top left.
General
