To Next PageTo Next Page
Need help?Do you have a question about the Kemppi FastMig X 350 and is the answer not in the manual?
General| Welding Processes | MIG/MAG, Flux-Cored, MMA |
|---|---|
| Input Voltage | 3 x 400 V |
| Input Frequency | 50/60 Hz |
| Maximum Output | 350 A |
| Duty Cycle | 60 % at 350 A |
| Wire Feed Speed Range | 0.5 - 25 m/min |
| Wire Diameter Range (MIG/MAG) | 0.6 - 1.2 mm |
| Electrode Diameter Range (MMA) | 1.6 - 5.0 mm |
| Efficiency | 85 % |
| Power Factor | 0.93 |
| Protection Class | IP23 |
| Rated Output at 40°C | 350 A |
| Wire Diameter Range (Flux-Cored) | 0.8-1.6 mm |
