To Next PageTo Next Page
Need help?Do you have a question about the Kemppi MasterTig MLS 3000 and is the answer not in the manual?
General| Output Current Range (TIG) | 5 - 300 A |
|---|---|
| Output Current Range (MMA) | 10 - 300 A |
| Control Type | Digital |
| Input Frequency | 50/60 Hz |
| Open Circuit Voltage (OCV) | 80 V |
| Protection Class | IP23S |
| Power Source | Inverter |
| Welding Processes | TIG, MMA |
| Duty Cycle (TIG) | 100% @ 200 A, 40°C |
| Duty Cycle (MMA) | 100% @ 200 A, 40°C |
| Standards | IEC 60974-1, IEC 60974-1 |
| Dimensions (L x W x H) | 500 mm x 180 mm x 390 mm |
Provides an overview of the manual's purpose and safety instructions.
Introduces the Master MLS and MasterTig MLS welding systems and their components.
Instructions for checking the equipment upon delivery and handling packaging material.
Guidance on placing the welding machine for optimal cooling and stability.
Explains the importance and location of the machine's serial number.
Steps for attaching the function panel to the power source securely.
Details harmonic current requirements for connecting to the power supply.
Information regarding the installation of the mains cable and plug by an electrician.
Instructions for connecting electrode holders and earth cables, including polarity.
Guidance on selecting the correct polarity for MMA welding connections.
Proper methods for attaching the earth clamp for optimal contact and safety.
Procedure for connecting the MasterCool 10 cooling unit to the power source.
Information on using inert gases for TIG welding and setting the correct flow rate.
Detailed steps for safely installing a gas bottle and connecting the regulator.
Overview of available welding methods including MMA, TIG, and pulsed TIG.
Details on TIG welding capabilities and panel functions.
Explanation of synergic pulsed TIG process for automated parameter control.
Description of long pulsed TIG welding for enhanced weld pool control.
Guidelines for operating the welding power source safely and correctly.
Introduction to different function panels and their roles in welding.
Details and controls for the MEL panel used for MMA welding applications.
Description of the MEX panel's features for MMA welding and other processes.
Basic functions and controls of the MTL panel for TIG welding.
Pulsed TIG functions and controls for the MTX panel.
Pulsed TIG and Minilog functions with memory for the MTM panel.
Procedure for saving and recalling welding parameters using MTM panel memory channels.
Instructions for loading previously saved welding settings from memory channels.
How to select and use memory channels with remote control devices.
Guide to accessing and modifying panel setup parameters for customization.
Details on installing and using the R11F foot pedal for TIG welding current adjustment.
Details on routine checks and upkeep procedures for the welding machine.
Specific maintenance tasks to be performed every six months.
