6
Setup functions
Contact ignition current * B1
20 Factory setting 20 A
3…2
30
Adjustment range 3…230 A
Spark ignition duration * B2
1.0 Factory setting 1,0 s.
0.2
…2.
0
Adjustment range 0,2…2,0 s.
Downslope cutoff level * B3
10 Factory setting 10 % of the welding current
5…4
0
Adjustment range 5…40 % of the welding
current
Factory settings recall * B5
OFF Factory setting
PAN Recalls factory settings to the panel, but keeps
memory channels
ALL Recalls factory settings and empties the memory
channels
Downslope interruption – upslope
angle *
B6
1 Upslope speed maximum
2 According to the upslope setting
3 According to the downslope
Non-linear downslope
(Current drop in the beginning of
downslope)
B7
OFF Factory setting
0…5
0
Adjustment range 0…50 % of welding current
Torch switch long press * B8
0.4 Factory setting 0,4 s.
0.3
…1.
0
Adjustment range 0,3…1,0 s.
Cooling unit post running time * B9
OFF Factory setting 4 min.
ON Post-running time 30 s.
* Setting is always on ** Adjustable also by the Quick Setup
To Next Page
Loading...
