To Next PageTo Next PageWhy is my Kemppi Minarc 120 AU Welding System producing poor welding results?
Several factors can lead to poor welding results. Make sure the earthing clamp is firmly attached to a clean attachment point, and that the cable and its connectors are in good condition. Also, verify that the shielding gas flows correctly from the torch tip and that the electric voltage is stable and within the correct range.
What to do if the overheating indicator is lit on my Kemppi Welding System?
If the overheating indicator is on, it means the device has overheated. To resolve this, ensure that the cooling air can flow without any restrictions. If you've exceeded the machine's duty cycle, wait for the indicator to turn off. Also, check for supply voltage issues.
General| Input Voltage | 230 V |
|---|---|
| Output Current Range | 10 - 120 A |
| Input Current | 16 A |
| Electrode Size | 1.6 - 4.0 mm |
| Welding Current Range | 10 - 120 A |
| Protection Class | IP23 |
| Dimensions | 99 x 203 x 230 mm |
| Process | MMA |
Crucial guidelines for safe operation and preventing hazards.
Procedure for safely connecting the unit to the electrical power source.
Explanation of Manual Metal Arc (MMA) and TIG welding processes.
Description of the unit's controls, indicators, and their functions.
Select welding parameters for MMA welding based on filler manufacturer's recommendations.
