Kemppi Pro 3200 EVOLUTION - Accessories; Remote Control Devices; Control Panels

Pro 3200 Evolution, Pro 4200 Evolution, Pro 5200 Evolution/0109 – 5
© COPYRIGHT KEMPPI OY
R61
R61
R63
P21
P22 P23 R22
R21 S21
P31 P32 P33 H31
H32
S33 S34 S35 S36
S37
S31
S32
1.3. ACCESSORIES
Control of MMA/TIG welding current (R61), reference scale 1 … 10.
R20 6185419
MIG-MAG remote control device with controls for wire feed (R63) and voltage (R61), memory
scales 1 … 10.
You can use control device also for control of MMA current from potentiometer R63.
1.3.2. Control panels
PL panel 6185801
P21 Current meter
set value / welding current
P22 Voltage meter
open circuit / terminal voltage
P23 Display for adjustment value of MMA
welding dynamics -9 … 0 …+9
R21 Adjustment of welding current
R22 Adjustment of MMA welding dynamics
S21 Selection for local / remote control
local / MIG/TIG / remote control
PX panel 6185802
H31 Signal lamp for voltage display
H32 Signal lamp for display of adjustment status
P31 Current meter / set value / welding current
P32 Voltage meter / open circuit / terminal voltage
P33 Display for adjustment value of MMA
welding dynamics and start current -9 … 0 …+9
S31, Adjustment of welding current + / -
S32
S33 Selection for local / remote control
local / MIG/TIG / remote control
S34 Selection for characteristics
Point to point welding / normal welding /
carbon arc gouging
S35 Selection of property to be adjusted
MMA welding dynamics / start current
S36, Adjustment for MMA welding dynamics
S37 and start current + / -
RECALL STD = resetting of factory set up (=0)
1.3.1. Remote control devices
R10 6185409