To Next PageTo Next Page
Need help?Do you have a question about the Kemppi KEMPACT 323R and is the answer not in the manual?
General| Input Voltage | 3 x 400 V |
|---|---|
| Duty Cycle | 60% at 320 A |
| Input Current | 32 A |
| Wire Diameter | 0.6 - 1.2 mm |
| Protection Class | IP23 |
| Welding Process | MIG/MAG |
| Standards | EN 60974-1 |
Provides general information about the welding equipment and the operating manual.
Introduces the Kempact RA MIG/MAG welding machines and their intended purpose.
Details the innovative features and capabilities of the Kempact RA family of machines.
Explains the welding process, circuit formation, and essential safety notes.
Instructions for unpacking, positioning the machine, and electrical network compliance.
General view of the machine components and details on connecting cables.
Explains the use of shielding gas and its connection to the welding machine.
Guides on selecting and installing appropriate filler wire types for welding.
Steps for mounting wire spool, setting brake force, and loading wire.
Connecting the welding gun and setting feed roll pressure for optimal wire feed.
Details on wire guide tubes and feed roll specifications for different models.
Step-by-step guide for replacing the wire feed rolls.
Procedure for reversing the polarity of the welding machine for specific wires.
Explains the components and functions of the regular control panel.
Explains the components and functions of the adaptive control panel.
Safety precautions for welding, including ventilation and personal protective equipment.
Steps and tips for preparing and performing MIG/MAG welding.
Describes different welding positions and techniques like pushing.
Instructions for setting up and using the HOT SPOT function.
Routine daily checks and cleaning for the welding equipment.
Lists and describes spare parts for the welding gun.
Errors related to mains voltage and wire feed motor issues.
Information on unlisted error codes.
Identifies and rectifies common welding performance problems.
Technical specifications for 1-phase Kempact models.
Technical specifications for 3-phase Kempact models.
Technical data for 3-phase MVU Kempact models.
