To Next PageTo Next Page
Need help?Do you have a question about the Kemppi KEMPACT 251R and is the answer not in the manual?
General| Output 40 °C | 250 A |
|---|---|
| Protection Class | IP23 |
| Power Supply | 3-phase |
| Input Voltage | 3 x 400 V |
| Duty Cycle | 40 % @ 250 A |
| Connection Voltage | 3 x 400 V |
| Operating Temperature Range | -20 to +40 °C |
| Standards | EN 60974-1 |
Provides an overview of the operating manual and safety precautions.
Details the purpose, features, and benefits of the Kempact RA welding machines.
Instructions for safely unpacking and checking the welding machine upon arrival.
Guidelines for placing the welding machine in a suitable and safe operating environment.
Information regarding electrical supply requirements and compliance with network standards.
Explains the location and importance of the unit's serial number for identification and orders.
Identifies and labels the main components of the welding machine.
Details how to connect the welding machine to the mains power supply.
Explains the role, types, and connection of shielding gas for welding.
Provides instructions and safety notes for moving the machine with a gas cylinder.
Step-by-step guide on how to install the filler wire into the machine.
Instructions for correctly mounting and securing the wire spool onto the machine.
Details how to adjust the spool brake to prevent wire uncoiling.
Guide to pushing the filler wire through the feed mechanism and gun cable.
Instructions for connecting and handling the welding gun.
How to adjust feed roll pressure for optimal wire feeding.
Identifies and specifies wire guide tubes and feed rolls for different models.
Step-by-step instructions for replacing the wire feed rolls.
Explains how to reverse the machine's polarity for specific filler wire types.
Details functions of knobs, buttons, and indicators on the standard control panel.
Explains controls for dynamics, wire feed, voltage, material selection, and memory functions.
Describes the specialized process for localized spot heating and stress relieving.
Outlines daily checks and cleaning for the welding unit and gun.
Lists spare parts for the welding gun, including nozzles, tips, and liners.
