Kemppi KEMPACT 251R - Serial number; Machine introduction; General view of the machine

EN
Kempact 323 MVU:
This equipment complies with IEC 61000-3-12 provided that the short-circuit power Ssc
is greater than or equal to 1.5 MVA at the interface point between the user’s supply and
the public supply network. It is the responsibility of the installer or user of the equipment
to ensure, by consultation with the distribution network operator if necessary, that the
equipment is connected only to a supply with a short-circuit power Ssc greater than or equal
to 1.5 MVA.
2.4 Serial number
The serial number of the unit is marked on the rating plate. The serial number makes it
possible to trace product manufacturing series. You might need the serial number when
placing spare parts orders or when planning maintenance.
3. MACHINE INTRODUCTION
3.1 General view of the machine
FE 32
1.
3.
5.
4.
2.
1. Supply voltage cable
2. Main switch
3. Shielding gas hose connector
4. Welding gun and cable
5. Earth return clamp and cable
Kempact 251R, 253R, 323R, 181A, 251A, 253A, 323A
6