Need help?Do you have a question about the Kemppi MasterTig 325DC and is the answer not in the manual?
General| Protection Class | IP23S |
|---|---|
| EMC standard | EN 60974-10 |
| Output Current Range (MMA) | 10 - 325 A |
| Output @ 40 % ED | 325 A |
| MMA welding current | 10 - 325 A |
| Open Circuit Voltage | 90 V |
| Cooling Method | Air |
| Standards | EN 60974-1, EN 60974-10 |
| Operating temperature range | -20°C to +40°C |
Details the components of the welding system, including power sources, control panels, and cooling units.
Instructions for connecting the power source to the mains supply.
Steps for attaching and securing the control panel to the power source unit.
Procedure for installing the MasterTig Cooler M cooling unit.
Guide on how to install the optional particle filter.
Instructions for mounting welding equipment on transport carts.
Steps for connecting both gas-cooled and water-cooled TIG torches.
Guide on how to properly connect the earth return cable.
Instructions for connecting the MMA electrode holder.
Steps for installing and pairing wireless and wired remotes.
Procedures for installing a gas bottle.
Guide for mounting a gas bottle onto a cart.
Safety instructions and procedures for lifting the welding equipment.
Steps to turn on and start the welding power source.
Details on using the MTP23X and MTP33X control panels.
Overview of the MTP35X control panel features.
Steps for operating the MasterTig Cooler M.
Information on using hand and foot pedal remote controls.
Guidelines for the environmentally responsible disposal of electrical equipment.
Lists error codes, their possible causes, and proposed actions.
Technical specifications for the MasterTig 235ACDC power source.
Technical specifications for the MasterTig 325DC power source.
Technical specifications for the MasterTig 335ACDC power source.
Technical specifications for the MasterTig 425DC power source.
Technical specifications for the MasterTig Cooler M.
General guidance tables for TIG welding parameters.
Explanations of various welding processes and features.
Explanations of symbols used in the manual.
Lists available accessories and their ordering codes.
To Next Page