Kemppi TTC 130 User Manual

4 – TTC 130, TTC 130F, TTC 160, TTC 160S, TTC 220, TTC 200W,
TTC 250W, TTC 250WS/0109
© COPYRIGHT KEMPPI OY
1.2.2. Selection table for consumable parts TTC 160, TTC 220, TTC 250W
Normal gas nozzle equipment
Welding current Size 9580266
DC [A] AC [A] Ø [mm (in)]
WC20 9873531
5…80 5…50 1,0 (.040) WZ8 9873520 9876866 7990680 4 7990766
5 7990770
WC20 9873532 4 7990766
70…150 30…100 1,6 (1/16) WZ8 9873521 9876867 7990681 5 7990770
6 7990771
WC20 9873533
130…250 80…150 2,4 (3/32) WZ8 9873522 9876868 7990682 6 7990771
7 7990772
WC20 9873534 7 7990772
220…350 120…210 3,2 (1/8) WZ8 9873523 9876869 7990683 8 7990773
10 7990775
WC20 9873535 8 7990773
330…500 180…280 4,0 (5/32) WZ8 9873524 9876870 7990684 10 7990775
W 9873505 12 7990776
Gas lens equipment
9876860+9580266
Welding current Size
DC [A] AC [A] Ø [mm (in)]
WC20 9873531
5…80 5…50 1,0 (.040) WZ8 9873520 9876866 7990710 5 7990783
WC20 9873532
70…150 30…100 1,6 (1/16) WZ8 9873521 9876867 7990711 5 7990783
6 7990784
WC20 9873533
130…250 80…150 2,4 (3/32) WZ8 9873522 9876868 7990712 6 7990784
7 7990785
WC20 9873534 7 7990785
220…350 120…210 3,2 (1/8) WZ8 9873523 9876869 7990713 8 7990786
11 7990787
WC20 9873535
330…500 180…280 4,0 (5/32) WZ8 9873524 9876870 7990714 8 7990786
W 9873505 11 7990787
Data in table are given only as a guide.
1.3. OPERATION SAFETY
Please study these Operation safety instructions and respect them when installing, operating and
servicing the machine.
Welding arc and spatters
Welding arc hurts unprotected eyes. Be careful also with reecting arc ash. Welding arc and
spatter burn unprotected skin. Use safety gloves and protective clothing.
Danger for re or explosion
Pay attention to re safety regulations. Remove ammable or explosive materials from welding
place. Always reserve sufcient re-ghting equipment on welding place. Be prepared for

Kemppi TTC 130 Specifications

General

Brand	Kemppi
Model	TTC 130
Category	Blower
Language	English