EasyManua.ls Logo

KEN STONE XN10-8 - Machine Troubleshooting Guide; Other Machine Symptoms

KEN STONE XN10-8
174 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Troubleshooting
Other Symptoms
Other Symptoms
For the symptoms not listed in table below or the further existed problems after appropriate solutions,
please consult with your sales or service dealer.
6-9
Problem
Cause
Solutions
The left and right joysticks
cannot move flexibly
l Lack of grease on left
and right joysticks
l Lubricate the joystick
The throttle lever cannot
move flexibly
l The throttle cable is
pulled too loosely
l Adjust or replace (consult
your sales or service agent).
Bucket, slewing or
walking operations
cannot be performed
l The safety lock lever
has been raised
(locked)
l Lower (release) the safety
lock lever. Please refer to
page 2-11.
Not enough digging power
l Hydraulic oil level is
too low
l The hydraulic oil is not
hot enough
l Air filter is clogged
l Incorrect hydraulic oil
type
l Add to the
specified liquid
level. Please
refer to page 5-
19.
l Clean the air
filter. Please
refer to page 5-
29.
l Replace
hydraulic oil.
Please refer to
page 5-36.
Unable to walk or
inflexible
l Stone or foreign object
stuck
l Remove foreign objects
The machine turns right/left
l A stone or foreign
object is stuck.
l The track tension
adjustment is faulty
l Remove foreign objects
l Adjust the track to the
specified tension. Please refer
to page 5-23.

Table of Contents

Related product manuals