EasyManua.ls Logo

KEN STONE XN10-8 - Machine Operating Procedures; Prohibited Machine Operations; No Digging While Traveling; Steady Hydraulic Cylinder Operation

KEN STONE XN10-8
174 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operations
Operating Procedures
Operating Procedures
Prohibited Operations
Warning
Do not operate on a bed rock (hard or
soft).
Do not slew during the traveling. If it’s
necessary to operate the bucket working
device during traveling, operate at
sufficiently low speed to ensure the
complete control at all times.
Do not use the slewing force for demolition
or leveling operations.
Do not use slewing force to dismantle walls or
level ground. In addition, do not insert the
bucket teeth into the ground during slewing.
Otherwise the bucket working device will be
damaged.
No Digging during Traveling
Do not insert the bucket into the ground or use
the traveling force for digging.
Steady Operations of Hydraulic Cylinders
Do not extend any hydraulic cylinder to the end.
Reserve an allowance during operations.
3-14

Table of Contents

Related product manuals