KEN STONE XN12-9 - Basic Parameters

Applicable models: XN12-9
7-2
XN12-9
Technical parameters
Unit
Overall weight
kg
1123
1130
Bucket capacity
m
3
0.02
0.02
Type of working
device
Backhoe
Backhoe
Engine
Model
Kubota D902
Yanmar3TNV74
Displacement
L
0.898
0.993
Rated output
power/speed
kw/r/min
11.8/2300
11.2/2400
Maximum
torque/rotating speed
N.m/r/min
51.3/1800
51.8/100
Speed
Maximum traveling
speed (High/low)
km/h
1.5
1.3
Slewing speed
rpm
11
11
Maximum grade
ability
30%
30%
Track sub assembly
Ground pressure
k Pa
34.64
29.9
Material
Rubber
Rubber
Tension control type
Tightening cylinder
Tightening cylinder
Type of pump
gear pump
gear pump
Fuel/oil/fluid
pressure and
capacity
Working pressure
Mpa
16
16
Flow
(L/min)
18.4
19
Hydraulic oil tank
capacity
(L)
16
15
Fuel tank capacity
(L)
11
11
All ratings of the machine are obtained when the machine is operating on a solid horizontal support
surface. If the working environment conditions of the machine differ from the above-mentioned
reference conditions (Such as the operations on uneven ground and slope), the operator shall take these
conditions into consideration.
Parameter
Basic Parameter