• i ¸
L._ = 'i ,' ''
II
p
PICKING UP BOBBIN THREAD
Raise presser foot lever.
Hold needle thread loosely in left hand and rotate hand wheel
toward you one complete turn.
Bri.ng bobbin thread up by pulling upper thread.
(See illustration).
Place threads back under presser foot.
ADJUSTING THE PRESSURE OF THE
PRESSER FOOT
Push down outer ring of presser foot knob (See illustration).
This will release pressure of presser foot. To increase pressure,
push down inner pin until suitable pressure is obtained.
For ordinary sewing, the inner pin should be about half way
down. When sewing multiple thickness or heavy material,
reduce the pressure. Increase it when sewing sheer fabrics.
Insufficient pressure may cause skipped stitches or difficulty
in guiding the fabric. If feed dog or presser foot marks appear
on the fabric, reduce the pressure.
10
To Next Page
Loading...
Need help?
General
