O O
Always make a practice buttonhole on a scrap of fabric used
in the garment, using a double thickness of fabric, and an
interfacing if used in garment.
O
_ .......... ........... ...
u
0
The stitch length may be varied slightly by the stitch length
control lever within the 0 to 1 range. To increase forward
stitch move this lever from the arrow mark toward 1, to
decrease move it toward O.
The buttonhole reverse stitch length control is used to match
the length of the reverse stitches with the forward stitches.
Turn the dial down for shorter stitches and up for longer
stitches. Generally only a slight adjustment of this control is
required. Excessive movement of this control will alter the
forward stitch length and may reverse the forward motion.
These setting may vary depending on type of fabric used.
21
To Next Page
Loading...
