Starting Your Dishwasher
• Load the dishwasher (see pages 7 and 8).
° Add detergent (see page 10),
o Ciose the door but DO NOT LATCH IT.
• If dishwasher drains into a food waste disposer, oper-
ate disposer until it is empty,
• Turn on hot water faucet nearest dishwasher and let
water run until it is hot.
• Turn the Cycle Indicator Dial to the desired wash
cycle Then latch the dora to start the dishwasher.,
• tfvou plan to use the PLATE WARMER option
(which is for warming clean dishes and plates fbr the
serving of hot foods), follow these steps:
1, Load clean dishware to be warmed.
2, Make sure HOT DRY is selected,
3, Be sure the door is unlatched,
4,, Slowly turn the Cycle Indicator' Dial to PLATE
WARMER.
5, Latch the door' to start the cycle.
Select the Cycle
(Cycle time includes dry cycle)
HEAVYWASH ! _-J-_:,'::_ ]
For heavily soiled dishes and r /'_._-Ta,_._,
J
Cyde Time," Approx, 89 minutes
Water Usage: Approx. 10.3 gallons
N 0 RMAL WAS H _------_" a-r'
For normally soiled dishes, _(_) ......_'_
Cycle Time= Approx_ 83 minutes
Water Usage: Approx. 8,6 gallons
LIGHT WASH
For prerinsed or lightly soiled
dishes and dishes that have been
stored,,
Cycle Time: Approx,, 80 minutes
Water Usage= Approx 7.t gallons
RINSE & HOLD
For rinsing dishes that will be
washed later. DO NOT USE
DETERGENT.
Cycle Time: Approxo 9 minutes
Water Usage: Approx, 3.0 gallons
Seloc COOLr,RY o-heat
drying option.
(conti,.ted next page)
To Next Page
Loading...