Twin Needle Stitches (Option)
Stitch selector: E or F
Presser foot: Zigzag foot
(_ Needle thread tension: 1 to 4
(_ Needle: Twin needle (optional item)
NOTE: Do not set the stitch pattern selector at A, B, C, D,
G, H, I, J or K, otherwise the needle may hit the needle
plate or presser foot and could possibly break.
(_) Upper thread guide
(_) Check spring holder
@ Thread take-up lever
@ Twin needle (optional item)
Turn off the power switch. Pull up the
Place a piece of felt on the additional
you separate the two strands of thread
through the needle bar thread guide
other on the right ........... ............................
Change the needle to a twin needle each
fromfronttoback::: : :
When you want to to chanc
direction, you mus_ _i_ raise the needle out
To Next Page
Loading...
