Kenmore 158.1813 - Chain Stitching

Page
4
a
Your machine will
make a special
temporary type stitch -a chain stitch .
The chain stitch is made by the
upper
thread only . The appearance of the
stitch from the top of fabric
is almost
the same as regular straight stitch . Just
pull on the thread end, you can remove
thread easily .
~peciai
atitch
JVr,"-
;titch Length Control -
around 10
stitch Width Control - Red"S"
-special Stitch Variegator - RedDot
Jse straight stitch foot, chain
stitch adapter
chain stitch needle plate .
DUSTING MACHINE FOR
1 . Be sure the needle is
at its highest
position
by turning handwheel .
2 .
Remove hand hole cover plate .
3 . Remove multi purpose needle plate,
bobbin
and bobbin case from
shuttle .
4 . Insert chain stitch adapter
onto the
shuttle
center pin . Be sure the
adapter clicks into place when
you
fit it onto shuttle
.
5 . Place the black chain stitch plate
onto the needle plate and
replace
hand hole cover plate .