Kenmore 158.1813 - Reverse Stitch Designs

REVERSE STITCH DESIGNS-USING VARIEGATOR
rONTOrl
To shorten or lengthen the design as shown in the illustrations
below, turn
the Variegator Control very . slightly from the M position . To shorten the
design, turn the control toward S, to lengthen the design turn
control toward
L .
Fig . 1 Shortened design
Fig .
2 M Setting - Standard size of design
`~L~l~LSL~I~LS
Fig .
3 Lengthened design
Basic and Reverse Patterns as made with the DoubleNeedle .
Using the double needle and two colors
of thread you may create unusual
and different designs with both the basic design cams and the reverse
stitch
cams . See next page for directions for
stitching with the double needle .
Basic type
design
Reverse stitch type design