Kenmore 158.1813 - Threading of Top Thread

Fig .
1
Fig . 2
Place thread on spool pin
as shown
with thread coming from back of the
spool . Draw thread through
the top
threading tube . Holding the spool
stationary with right
hand, pull the end
of the thread between the tension discs
as shown . Pull the spring wire
loop up
and past the top hook until the thread
can be slipped
into hook (See Fig . 2) .
When the thread is released, the spring
wire loop will return to position
(Fig .
3) with thread in proper place . Release
spool of thread and hook thread into
take up lever as shown (Fig . 4) .
Continue to thread machine exactly as
shown . Needle must always be thread-
ed in direction as shown in Fig . 5 .