CONTROL PANEL AND FEATURES
Regular
2nd One Rinse
Medium Cool Warm Rinse w_th_abfl_ soflen_
2nd Rinse
LOAD SIZE WASH TEMP RINSE
0
O
Not all features and options are available on all models.
Appearance may vary.
LOAD SiZE
Select the setting most suitable for your load. Extra Small will
add a low amount of water for smaller loads and Extra Large
will add the most amount of water for large or bulky loads.
Items need to move freely. Tightly packing the load can lead
to poor cleaning performance, and may increase wrinkling
and tangling.
WASH TEMP
Wash Temp senses and maintains uniform water temperatures
by regulating incoming hot and cold water.
Select a wash temperature based on the type of fabric and
soils being washed. For best results and following the garment
label instructions, use the warmest wash water safe for your
fabric.
* Warm and hot water may be cooler than what your
previous washer provided.
* Even in a cold and cool water wash, some warm
water may be added to the washer to maintain
a minimum temperature. All rinses are cold.
O
O
RINSE OPTIONS (on some models)
The following options may be added to most cycles.
ONE RINSE
Provides basic rinsing for any cycle.
2ND RINSE
This option can be used to automatically add a second
rinse to most cycles.
ONE RINSE with Fabric Softener
This option must be selected if using fabric softener
during a cycle. It ensures that fabric softener is added
at the correct time in the rinse for even distribution.
2nd RINSE with Fabric Softener
This option turns on both the Fabric Softener and the
2nd Rinse options.
WASH CYCLE KNOB
Use the Wash Cycle knob to select cycles on your washer.
See _'Cycle Guide" for detailed descriptions of cycles.
O START/PAUSE/Unlock Lid button
Press to start the selected cycle; press again to pause the
cycle and unlock the lid.
NOTE: If the washer is spinning, it may take several minutes to
unlock the lid. Press and hold for 3 seconds to cancel a cycle.
To Next Page
Loading...
Need help?
General
