Kenmore 253.25003 User Manual (English)

Questions and Answers:

H
Heather BradleyJul 31, 2025
What to do if my Kenmore 253.25003 Dehumidifier does not operate?
- J
  Jose JonesJul 31, 2025
  If your Kenmore Dehumidifier isn't working, here are some things to check: * Make sure the wall plug is firmly pushed into the outlet. * Check for a blown fuse or tripped circuit breaker and replace or reset it. * If the selected dryness level has been reached, the dehumidifier shuts off automatically. Select 'CONTINUOUS' if you want to remove more moisture. * Ensure the bucket is correctly installed. * If the bucket is full, empty it and return it to its position. * Make sure the dehumidifier is turned on. * If the “BUCKET FULL“ light is on, remove the bucket, empty the water, and reinstall it correctly.
A
Andrea HarrisAug 5, 2025
Why does frost appear on the coils of my Kenmore Dehumidifier?
- J
  Jennifer LewisAug 5, 2025
  Frost appearing on the coils above the bucket or drip tray of your Kenmore Dehumidifier is usually normal due to the refrigerant flowing through the coil. If the room temperature is too low, frost will usually disappear within 60 minutes. The dehumidifier should operate satisfactorily at temperatures higher than 5 °C (41 °F).
M
Mariah TurnerAug 12, 2025
Why is my Kenmore Dehumidifier running too much?
- A
  Amanda AcostaAug 12, 2025
  If your Kenmore Dehumidifier runs too much, consider these potential solutions: 1. Ensure all windows and doors to the outside are closed. 2. Consult your dealer to verify if the unit's capacity is suitable for your space. 3. Make sure the dehumidifier is in a location that allows unrestricted airflow into the rear coil and out of the front grill. 4. Clean the grill using the brush attachment of a vacuum cleaner. 5. Adjust the humidity setting to a higher relative humidity (RH%) level using the humidity button or knob.
A
Amy HarringtonAug 17, 2025
How to reduce fan noise in Kenmore Dehumidifier?
- A
  Austin TaylorAug 18, 2025
  This level of fan noise is a normal sound for the Kenmore Dehumidifier.
K
Kevin OrtizAug 25, 2025
What to do if my Kenmore 253.25003 is operating but the room is not dry enough?
- C
  Christopher WeberAug 25, 2025
  If your Kenmore Dehumidifier is running, but the room isn't dry enough, consider the following: * The humidity setting might be too high. Adjust it to a lower setting or select 'CONTINUOUS' for maximum dryness. * If the dehumidifier was recently installed or restarted, it will take longer to dry the room air, especially if the moisture level is high. * Ensure the dehumidifier is properly located for effective operation. * The unit will not operate well if the room temperature is below 5 °C (41 °F).