EasyManua.ls Logo

Kenmore 253.25033 - User Manual

Kenmore 253.25033
10 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
P/N 2020266A0280
Kenmore®
Sears Brands Management Corporation
Hoçman Estates, IL 60179 U.S.A.
www.kenmore.com
www.sears.com
English / Français
Use&CareGuide
Manuel d’utilisation et d’entretien
Models/Modèles: 253.25031, 253.25032, 253.25033
'HKXPLGLoHU
'ÑVKXPLGLoFDWHXU

Table of Contents

Questions and Answers

  • C
    Christopher FoxAug 7, 2025
    What to do if my Kenmore 253.25033 does not operate?
    • E
      Edward BuchananAug 8, 2025
      If your Kenmore Dehumidifier isn't operating, first, ensure it's properly plugged into the wall outlet. Check for a blown house fuse or a tripped circuit breaker and replace or reset it. If the dryness level you selected has been reached, the dehumidifier automatically shuts off; select 'CONTINUOUS' if you want to remove more moisture. Make sure the bucket is correctly installed and not full. Also, ensure the dehumidifier is turned on and that the 'BUCKET FULL' light is not illuminated; if it is, empty and reinstall the bucket.
  • L
    Lorraine FischerAug 13, 2025
    Why does frost appear on the coils of my Kenmore 253.25033 Dehumidifier?
    • K
      Kimberly RiversAug 13, 2025
      Frost may appear on the coils above the bucket or drip tray of your Kenmore Dehumidifier if the unit has been turned on recently. This is normal due to refrigerant rushing through the coil and should disappear within 60 minutes. If the room temperature is too low, ensure it is higher than 5 °C (41 °F) for satisfactory operation.
  • M
    Megan Crosby DVMAug 20, 2025
    Why does my Kenmore Dehumidifier run too much?
    • J
      Joshua JohnstonAug 20, 2025
      Your Kenmore Dehumidifier might be running too much because windows or doors near the unit are open to the outdoors—try closing them. The area you're trying to dehumidify could be too large, so consult your dealer to check if the unit's capacity is adequate. Also, ensure that air movement through the dehumidifier isn't blocked, and clean the grill with a vacuum cleaner brush attachment. Finally, if the dehumidifier is in CONT mode, use the humidity button or knob to set a higher relative humidity level.
  • E
    Emily RamirezAug 26, 2025
    What to do if my Kenmore 253.25033 is operating but the room is not dry enough?
    • T
      Timothy RussellAug 26, 2025
      If your Kenmore Dehumidifier is running but the room isn't dry enough, the humidity setting might be too high. Press the HUMIDITY button or rotate the knob to a lower setting, or choose CONTINUOUS for maximum dryness. If the dehumidifier was recently installed or restarted, it will take longer to dry the room air, especially if the moisture level is high. Ensure the dehumidifier has sufficient clearance and that airflow to the front grill isn't blocked. The unit won't work well if the room temperature is below 5 °C (41 °F). It may also be running too much, so refer to the solutions for that problem.
  • V
    Virginia GardnerAug 31, 2025
    How to fix fan noise in Kenmore 253.25033?
    • M
      Michael BrownSep 1, 2025
      The fan noise you hear from your Kenmore Dehumidifier is normal; it's simply the sound of air moving through the unit.

Summary

Kenmore Dehumidifier Limited Warranty

Exclusions

Details items not covered by the manufacturer's warranty, including wear and tear, misuse, and neglect.

Repairs

Outlines the policy for repairs conducted within the warranty period, stating they are warranted until the end of the original period.

Disclaimers

States that warranties are exclusive and in lieu of others, and grants specific legal rights that may vary by jurisdiction.

Customer Responsibilities

Lists user obligations such as proper operation, maintenance, and care to avoid voiding the warranty.

Procedures

Provides the contact number for obtaining warranty service, indicating availability via phone.

List of Applicable Warranty Periods

Specifies the duration of coverage for parts and labor, including a separate period for the sealed system.

Service Type

Explains that dehumidifier service is provided on a "carry-in" basis to a Sears Retail or Product Repair Centre.

Proof of Purchase;Documentation

Details the requirement for an original sales receipt or other adequate written proof for warranty coverage.

Read and Save These Instructions

Record Your Model and Serial Numbers

Instructions to record the model and serial numbers in the provided space for future reference and service.

Important Safety Instructions

General Safety Precautions

Includes warnings about flammable liquids, non-potable water, and child safety during operation.

Electrical Safety

Emphasizes using the grounded plug, avoiding extension cords, and proper outlet installation.

Selecting a Location

How It Works

Dehumidifier Feature

Continuous Mode Operation

Explains how to operate the unit in continuous mode for initial drying and odor removal.

Humidity Setting Adjustment

Guides users on how to set the desired humidity level between 35% and 85%.

Fan Speed Control

Describes how to adjust the fan speed to HIGH or LOW for moisture removal efficiency.

Filter Reset Indicator

Explains the filter reset light and how to extinguish it after cleaning the filter.

Timer Functionality

Details how to set Delay Start or Delay Stop timers for the unit from 0.5 to 24 hours.

Shutting Down the Unit

Instructs users on how to turn off the dehumidifier using the ON/OFF button.

Fault Codes

Removing Collected Water

Emptying the Bucket

Details the process of removing, emptying, and correctly re-installing the water bucket.

Continuous Drainage

Explains how to connect a garden hose for continuous water removal to a nearby drain.

Care and Cleaning

Filter Maintenance

Provides instructions for removing, washing, drying, and re-installing the filter every two weeks.

Cabinet Cleaning

Guides on how to dust the cabinet with an oil-free or damp cloth and vacuum the grill.

Water Bucket Cleaning

Instructs to clean the water bucket using warm water and detergent.

Power Cord Storage

Dehumidifier Troubleshooting Guide

Dehumidifier Does Not Operate

Lists common issues and solutions for when the dehumidifier fails to start or function.

Dehumidifier Runs Too Much

Addresses scenarios where the unit runs excessively, suggesting checks for airflow and settings.

Room Not Dry Enough

Provides troubleshooting steps when the room remains too humid despite the unit operating.

Frost on Coils

Explains the cause of frost on coils and when it is considered normal operation.

Fan Noise

Assesses fan noise, indicating when it is a normal operational sound.

Kenmore 253.25033 Specifications

General IconGeneral
BrandKenmore
Model253.25033
CategoryDehumidifier
LanguageEnglish

Related product manuals