SECTION2. PREPAREYOURMACHINEFOR SEWING
Prepare the Bobbin (Contmued)
e Insert the Bobbin Into the Bobbin Holder
(_ Put the bobbin _nto the bobbin
holder so that the thread leeds
eo_nter-elockwlse.
(_ Pull about 4 inches ot thread
to,yard you Ihrough the teos_on
_|o[ @ +
_ Tt_rea_ie_3
C|I_}*[
(_) Then pul! the thread clockwmse
toward the back o_ the machine
through the sfot (_).
(_ Slide the bobbin cover plate while
pushing it down slightly over the
bobbin. Allow about 4 inches of
thread Io show above the needle
plate.
Bobbin thteadin 9 char[ is located
behind the taee cover plate,
2O
To Next Page