SECTION5. LEARNTHESTITCHES
Automatic Buttonholing
S_z the Machi_ta
£#rlack Thread tensie_
2 to6
N: AiJtonla[_¢ buttor_hote fo_at
=CGO- -GZ3
Rounded
Keyhole
"¢he Kenmore 100 Sthch sews three
different types at buttonhole to meet
every sewing need, All three buttonholes
are made in she same way.
Automatic buttonhole toot will gauge the
buttonhole Iength,
Be|ore you sew buttonho|es on the actual
garment, make several practice button-
holes.
l. a. Press the Up/Down Needte Posnion
Sutton to raise she need|e to ItS
highest position+
b, Rinse the presser toot.
c. Remove the toot holder,
d. Attach the automatic buttonhole
toot by tightening the toot holder
screw.
Thickness
Oiameter
2.5 cm |31t32"1
Pull
2. a, Draw both threads toward the lest under the toot,
b, Lower the needle to the bottom mark.
C. Lower the presser foot,
d. Open the button holder by pul|ing it back as shown above,
e, Place the button you intend to use on the button holder at the
automatic buttonhole foot N,
t. Press the back at the holder towards you to secure the be|Ion,
NOTE: if the thickness ot button |s more than 0A cm {3t16"),
measure thickness and diameter and set the button holder as
shown.
EXAMPLE: tf _[he button _s 2 cm (3/4") {n diameter and 0.5 em
(3/t6"] in thickness, set the measure 2,5 cm (3t/32"L
6£
To Next Page
Loading...
