Kenmore 721.80039 - Step 1: Prepare the Electrical Connections; Avoid Electrical Shock! This Appliance Must Be Grounded!; Do Not, Under Any Circumstances, Remove the Power Supply Cord Grounding Prong!

STEP1: PREPARETHEELECTRICALCONNECTIONS
WARNING
AVOID ELECTRICAL SHOCK[ THIS APPLIANCE MUST BE GROUNDED[
1. Locate the grounded electric outlet for this oven in the cabinet
above the oven, as shown in Figure 4 Detail.
NOTE: The outlet should be on a circuit dedicated to the
microwave oven 120V, 60Hz., AC only, with a 20ampere
fused electrical supply.
IMPORTANT: If you do not have the proper wail outlet, you
MUST have one installed by a qualified electrician.
2. You will cut the power-supply-cord hole (shown in Figure 4 Detail)
later when you prepare the wail and upper cabinet in Step 4.
NOTE: Do not use an extension cord. Keep the power cord dry and
do not pinch or crush it.
Upper Cabinet
...................................
0
1
Power-Supply-Cord Hole
Grounded
Outlet
Figure 4 Detai[
_, WARNING
improper grounding could result in electric shock or other personal injury.
• DO NOT, UNDER ANY CIRCUMSTANCES, REMOVE THE POWER SUPPLYCORD
GROUNDING PRONG[
This appliance MUST be grounded[
7