Kenmore 79080322310 - User Manual

Installation
Instructions
Overthe Range
Microwave Oven
I
Questions? Call 1-800-4-MY-HOME ®
or Visit our Website at: http://www.kenmore.com
I
BEFORE YOU BEGIN
Read these instructions completely and carefully.
• IMPORTANT - Savethese
instructions for local inspector's use.
• IMPORTANT - Observeall
governing codes and ordinances.
• Note to Installer - Be sure to leave these
instructions with the Consumer.
• Note to Consumer - Keep these
instructions for flJture reference.
• Skill level - Installation of this appliance requires
basic mechanical and electrical skills.
• Proper installation is the responsibility of the installer
• Product failure due to improper installation is not
covered under the Warranty.
READ CAREFU LLY.
KEEP THESE INSTRUCTIONS.
pin 316495111
May 2013

Summary

Before You Begin

Important Safety Instructions

Electrical Requirements

Damage-Shipment;Installation

Parts Included

Tools You Will Need

Mounting Space

Placement of the Mounting Plate

A. Removing the Microwave Oven from the Carton;Removing the Mounting Plate

Steps for unboxing the microwave and preparing the mounting plate.

B. Finding the Wall Studs

Method for locating wall studs for secure mounting.

C. Determining Wall Plate Location Under Your Cabinet

D. Aligning the Wall Plate

Installation Types

A. Outside Top Exhaust (Vertical Duct)

Installation details for vertical top exhaust ventilation.

B. Outside Back Exhaust (Horizontal Duct)

Installation details for horizontal back exhaust ventilation.

C. Recirculating (Non-Vented Ductless)

Instructions for non-vented recirculating exhaust setup.

External Exhaust Ducting

A. Outside Top Exhaust (Vertical Duct)

A1. Attach the Mounting Plate to the Wall

Step-by-step guide for securing the mounting plate to the wall.

A2. Use Top Cabinet Template for Preparation of Top Cabinet

A3. Adapting Microwave Blower for Outside Top Exhaust

Steps to configure the blower unit for top exhaust.

A4. Check for Proper Damper Operation

A5. Mount the Microwave Oven (Top Exhaust)

Procedures for lifting and attaching the microwave oven.

A6. Adjust the Exhaust Adaptor

A7. Connecting Ductwork

Guidance on connecting the exhaust duct to the unit.

B. Outside Back Exhaust (Horizontal Duct)

B1. Preparing the Rear Wall for Outside Back Exhaust

Steps to create an opening in the rear wall for exhaust.

B2. Remove Blower Plate

How to remove the blower plate for configuration.

B3. Attach the Mounting Plate to the Wall

B4. Use Top Cabinet Template for Preparation of Top Cabinet

Preparing the top cabinet with mounting holes.

B5. Adapting Microwave Blower for Outside Back Exhaust

Steps to reconfigure the blower unit for back exhaust.

B6. Mount the Microwave Oven

C. Recirculating (Non-Vented Ductless)

C1. Attach the Mounting Plate to the Wall

Instructions for attaching the mounting plate for recirculating setup.

C2. Use Top Cabinet Template for Preparation of Top Cabinet

C3. Check Blower Plate

Verifying correct blower plate installation.

C4. Mount the Microwave Oven (Recirculating)

Steps to secure the microwave oven to the top cabinet.

C5. Installing or Change the Charcoal Filter

Before You Use Your Microwave

Rear Wall Template

Top Cabinet Template

Kenmore 79080322310 Specifications

General

Brand	Kenmore
Model	79080322310
Category	Microwave Oven
Language	English