Kenmore 79080343310 User Manual

Installation
Instructions
Overthe Range
Microwave Oven
I
Questions? Call 1-800-4-MY-HOME ®
or Visit our Website at: http://www.kenmore.com
I
BEFORE YOU BEGIN
Read these instructions completely and carefully.
• IMPORTANT - Savethese
instructions for local inspector's use.
• IMPORTANT - Observeall
governing codes and ordinances.
• Note to Installer - Be sure to leave these
instructions with the Consumer.
• Note to Consumer - Keep these
instructions for flJture reference.
• Skill level - Installation of this appliance requires
basic mechanical and electrical skills.
• Proper installation is the responsibility of the installer
• Product failure due to improper installation is not
covered under the Warranty.
READ CAREFU LLY.
KEEP THESE INSTRUCTIONS.
pin 316495111
May 2013

Kenmore 79080343310 Specifications

General

Brand	Kenmore
Model	79080343310
Category	Microwave Oven
Language	English

Summary

Important Safety Instructions

Electrical Requirements

Damage and Parts Information

Damage During Shipment or Installation

Guidelines for handling damage that occurs during shipment or installation.

Parts Included in Hardware Packet

Lists the hardware components provided with the microwave for installation.

Tools and Mounting Space

Tools Required for Installation

Lists all necessary tools for properly installing the microwave oven.

Mounting Space Requirements

Specifies the correct clearances and dimensions for microwave oven installation.

Placement of the Mounting Plate

Removing the Microwave Oven and Mounting Plate

Instructions for unpacking the microwave and separating the mounting plate.

Finding the Wall Studs

Methods for identifying and marking wall stud locations for secure installation.

Determining Wall Plate Location Under Cabinet

Guidance on positioning the mounting plate based on cabinet type and depth.

Aligning the Wall Plate

Steps for accurately aligning the mounting plate on the wall before securing.

Outside Top Exhaust Installation

Attach Mounting Plate to Wall

Securing the mounting plate to the wall using toggle bolts and screws.

Prepare Top Cabinet

Using the top cabinet template to drill holes for support and power cord.

Adapt Microwave Blower for Top Exhaust

Configuring the blower unit and exhaust adaptor for upward venting.

Check Damper Operation

Ensuring the damper moves freely before mounting the microwave.

Mount Microwave Oven

Lifting and securing the microwave oven onto the mounting plate and cabinet.

Adjust Exhaust Adaptor

Positioning the exhaust adaptor to connect with the house ductwork.

Connect Ductwork

Connecting and sealing the exhaust duct to the adaptor for proper ventilation.

Outside Back Exhaust Installation

Prepare Rear Wall for Exhaust

Cutting an opening in the rear wall to accommodate the horizontal exhaust.

Remove Blower Plate

Removing the blower plate from the microwave oven unit.

Attach Mounting Plate to Wall

Securing the mounting plate to the wall using toggle bolts and screws.

Prepare Top Cabinet

Using the top cabinet template to drill holes for support and power cord.

Adapt Microwave Blower for Back Exhaust

Configuring the blower unit and exhaust adaptor for rear venting.

Mount Microwave Oven

Lifting and securing the microwave oven onto the mounting plate and cabinet.

Recirculating (Non-Vented Ductless) Installation

Attach Mounting Plate to Wall

Securing the mounting plate to the wall using toggle bolts and screws.

Prepare Top Cabinet

Using the top cabinet template to drill holes for support and power cord.

Check Blower Plate

Verifying the correct installation of the blower plate on the unit.

Mount the Microwave Oven

Lifting and securing the microwave oven onto the mounting plate and cabinet.

Install or Change Charcoal Filter

Steps for replacing or installing a charcoal filter for odor control.

Before You Use Your Microwave