Kenmore 79080373310 User Manual

Installation
Instructions
Overthe Range
Microwave Oven
I
Questions? Call 1-800-4-MY-HOME ®
or Visit our Website at: http://www.kenmore.com
I
BEFORE YOU BEGIN
Read these instructions completely and carefully.
• IMPORTANT - Savethese
instructions for local inspector's use.
• IMPORTANT - Observeall
governing codes and ordinances.
• Note to Installer - Be sure to leave these
instructions with the Consumer.
• Note to Consumer - Keep these
instructions for flJture reference.
• Skill level - Installation of this appliance requires
basic mechanical and electrical skills.
• Proper installation is the responsibility of the installer
• Product failure due to improper installation is not
covered under the Warranty.
READ CAREFU LLY.
KEEP THESE INSTRUCTIONS.
pin 316495112
May 2013

Kenmore 79080373310 Specifications

General

Brand	Kenmore
Model	79080373310
Category	Microwave Oven
Language	English

Summary

BEFORE YOU BEGIN

General Information

Important Safety Instructions

Crucial safety guidelines before installation.

Electrical Requirements

Specifications for electrical connection and safety.

Damage—Shipment/Installation

Procedures for handling unit damage during transit or installation.

Parts Included

List of components and hardware provided with the unit.

Tools You Will Need

Required tools for the installation process.

Mounting Space

Guidelines for cabinet dimensions and clearances.

Step-by-step installation guide

Placement of the Mounting Plate

Steps for locating and preparing the wall for the mounting plate.

IMPORTANT SAFETY INSTRUCTIONS

ELECTRICAL REQUIREMENTS

DAMAGE—SHIPMENT/INSTALLATION

PARTS INCLUDED

TOOLS YOU WILL NEED

MOUNTING SPACE

Placement of the Mounting Plate

A. Removing the Microwave Oven from the Carton/Removing the Mounting Plate

Unpacking the unit and detaching the mounting plate.

B. Finding the Wall Studs

Locating wall studs for secure mounting.

C. Determining Wall Plate Location Under Your Cabinet

Positioning the mounting plate based on cabinet type.

D. Aligning the Wall Plate

Marking and aligning the mounting plate on the wall.

Installation Types

A Outside Top Exhaust (Vertical Duct)

Instructions for venting exhaust upwards through a vertical duct.

B Outside Back Exhaust (Horizontal Duct)

Instructions for venting exhaust horizontally through the back.

C Recirculating (Non-Vented Ductless)

Instructions for non-vented installations.

BEFORE YOU USE YOUR MICROWAVE