Need help?Do you have a question about the Kenmore 795.78763800 and is the answer not in the manual?
General| Brand | Kenmore |
|---|---|
| Model | 795.78763800 |
| Category | Refrigerator |
| Language | English |
Instructions for safely disconnecting the power cord before servicing the appliance.
Information intended for users with electrical, electronic, and mechanical experience.
Details on temperature control, defrost control, electrical ratings, and energy consumption.
Performance data under no-load conditions for different control positions.
Specifications for compressor capacity, vacuum, pressure, and refrigerant details.
Required clearances at the top, sides, and rear for proper air circulation.
List of part numbers for various components like Relay, Overload, and Motors.
Diagram illustrating the air flow within the refrigerator compartments.
Step-by-step instructions for removing and replacing the refrigerator doors.
Procedures for removing and replacing the door gasket and its clips.
Instructions on how to align refrigerator doors if the space between them is uneven.
Steps for removing and replacing the evaporator fan and its motor.
Procedure for replacing the defrost control assembly, including the sensor and fuse.
Instructions for replacing the refrigerator and freezer compartment lamps.
Steps for removing the multi duct component from the refrigerator.
Procedure for replacing the main printed wiring board (PWB).
Steps for disconnecting and removing the dispenser assembly.
Instructions for replacing the display printed wiring board (PWB).
Procedure for removing and replacing the funnel assembly.
Steps for replacing the sub printed wiring board (PWB) for the dispenser.
Procedure for removing and replacing the duct door.
Instructions for removing and replacing the ice corner door.
Steps for removing and replacing the icemaker assembly.
Procedure for removing the auger motor cover and accessing the motor.
Instructions on how to grip and remove the door ice bin.
Instructions on how to properly insert the door ice bin.
Detailed steps for removing and reinstalling the pullout drawer.
Procedure for disassembling the water valve.
Steps for disassembling the fan and fan motor.
Instructions for separating and installing the pull-out drawer mechanism.
Details on the compressor's role, composition, and important usage notes.
Explanation of the PTC starter's composition, role, and operating principles.
Definition and role of the Overload Protector attached to the compressor.
Step-by-step guide for removing the cover of the PTC component.
Diagnostic steps for issues related to the compressor and electrical components.
Troubleshooting for other electrical components like fan motors and defrost heaters.
A chart correlating common complaints with points to check and remedies.
Troubleshooting chart for issues related to the refrigeration cycle, including leakage and clogs.
Diagnostic flowchart for 'Not Cooling' complaints isolated to the sealed system.
Explanation of the icemaker's operation principle and stages.
Details on Icemaking, Harvest, and Fill/Park modes of the icemaker.
Procedure for performing a forced operation test on the icemaker.
Information on error codes displayed by the icemaker water supply control panel.
Description of initial settings, temperature adjustments, and display modes.
Details on the Printed Circuit Board (PCB) functions and circuits.
Table detailing sensor resistance values at different temperatures.
Guide for troubleshooting problems like power source, cooling, and temperature issues.
To Next Page