Why are my clothes still wrinkled after using the STEAM REFRESH cycle on my Kenmore Dryer?
If garments are still wrinkled after using the STEAM REFRESH cycle, it could be due to overloading the dryer or mixing different types of fabrics. For best results, use small loads of 1 to 5 items and load similar-type garments.
What to do if the ADD WATER indicator light is on during the drying cycle of my Kenmore 795.851**.900?
If the ADD WATER indicator light is on, there may be a water supply error. Here's what to check: 1. Ensure the steam feeder is filled with water up to the MAX line. 2. Make sure the steam feeder is properly seated and the drawer is fully closed. 3. Turn the dryer off, then restart the Steam cycle. Do not use distilled water. If the issue persists, unplug the dryer and call for service.
What to do if my Kenmore 795.851**.900 Dryer leaves garments too damp or too dry after using STATIC SHIELD?
If garments are too damp or too dry after using the STATIC SHIELD option, ensure you've selected the correct drying options. Manually select the load weight before starting the REDUCE STATIC option.
Why do odors remain in clothing after using the STEAM REFRESH cycle on my Kenmore Dryer?
If odors remain in clothing after using the STEAM REFRESH cycle, it means the cycle couldn't completely remove the odor. Fabrics with strong odors should be washed in a normal cycle.
What does BULKY LOAD on the display of my Kenmore 795.851**.900 Dryer mean?
The 'BULKY LOAD' display appears when the MORE TIME button has been pressed multiple times. This sets the cycle for a large load, like a comforter.
Why does water drip from the nozzle when the Steam Cycle starts on my Kenmore Dryer?
Water dripping from the nozzle at the start of the Steam Cycle is normal. This is steam condensation and should stop after a short time.
Why can't I see steam vapor at the beginning of the cycle in my Kenmore Dryer?
It's normal not to see steam vapor at the beginning of every cycle. Steam is released at different stages of the cycle depending on the selected option.
What to do if steam doesn’t generate but no error code is shown on my Kenmore Dryer?
If steam isn’t generating and no error code is displayed, unplug the dryer and call for service, as this could indicate a water level error.
What to do if there are no creases left on garment after STEAM REFRESH in Kenmore 795.851**.900?
The STEAM REFRESH cycle is designed to remove wrinkles from fabric. If you need to make creases, use an iron.
Instructions for reconnecting grounding devices after service.
Steps to take if a gas leak is detected.
Handling sensitive electronics to prevent ESD damage.
Information about dryer accessories like rack, stacking kit, and pedestal.
Steps for installing the dryer rack inside the drum.
Steps for installing the stacking kit to mount the dryer on a washing machine.
Instructions for connecting to 4-wire receptacles or direct wiring.
Instructions for connecting to 3-wire receptacles or direct wiring.
Instructions for direct hardwiring a 3-wire connection.
Details for connecting a 4-wire power supply cord.
Steps for connecting a 3-wire power supply cord.
Instructions for an optional 3-wire connection.
Procedure and expected results for testing the thermal cut-off.
Test procedure and results for the hi-limit thermostat.
Test procedure and results for the outlet thermostat.
Test procedure and resistance values for the lamp holder.
Test procedure and resistance values for the door switch.
Test procedure and resistance values for the idler switch.
Test procedure and resistance values for the heater.
Test procedure and resistance values for the thermistor.
Test procedure and reference to motor testing details.
Test procedure and resistance values for the gas valve.
Test procedure and resistance values for the igniter.
Test procedure and resistance values for the frame detect.
Test procedure and resistance values for the auto-reset outlet thermostat.
Test procedure and resistance values for the manual-reset outlet thermostat.
Explanation of how the centrifugal switch controls motor operation.
Guide to steam cycles, fabric types, and load amounts.
Common problems and solutions for steam dryer issues.
List of error codes and their causes/remarks for steam dryers.
Explanation of the FlowSense function and its purpose.
Procedure for performing an exhaust system installation check.
Troubleshooting steps for flow sensor indicator issues.
Flowchart illustrating the gas valve operation sequence.
Diagram showing gas ignition sequence steps.
Diagram illustrating the internal structure of the gas valve.
Steps for disassembling the top plate of the dryer.
Steps for disassembling the panel drawer and steam feeder.
Steps for disassembling the control panel and its components.
Steps for disassembling the dryer's cover cabinet.
Steps for disassembling the guide assembly, pump, and generator.
Steps for disassembling the frame body and panel frame.
Steps for disassembling the front tub drum assembly.
Steps for removing the drum assembly, including belt.
Instructions for changing the drum lamp bulb.
Steps for disassembling the filter assembly and disconnecting sensors.
Steps for disassembling the blower housing, fan, and motor.
Steps for disassembling the dryer's back cover.
Steps for disassembling the air duct and filter.
Steps for disassembling and removing the dryer rollers.
Exploded view of control panel and plate assembly components.
Exploded view of panel drawer and guide assembly components.
Exploded view of cabinet and door assembly for gas dryers.
Exploded view of drum and motor assembly for gas dryers.
To Next Page
General