Kenmore 796.3152#21 - Page 15

15
Cycle
Fabric or
Load Type
Wash
Temperature
Spin
Speed
Soil Level
Stain
Treat
Save
Energy
Extra
Rinse
Water
Plus
Add a
Garment
Whitest
Whites
Heavily to normally
soiled white cottons
Hot Medium Heavy
Warm
Extra High
High
Low
No Spin
Light
Normal
Express
Wash
Lightly soiled clothing
and small loads
Warm High Light
Cold
Tap Cold
Extra High
Medium
Low
No Spin
Normal
Heavy
Cold
Clean
Small loads of cotton,
linen, towels, shirts,
sheets, jeans, mixed loads
Tap Cold High Normal
Extra
High
No Spin
Low
Medium
Heavy
Light
Sanitize
Heavily soiled items,
such as work clothes,
diapers, etc.
Extra Hot High Heavy
Extra
High
No Spin
Low
Medium
Light
Normal
Delicates
Dress shirts/blouses,
nylons, sheer or lacy
garments
Tap Cold Low Light
Cold
Warm
High
Medium
No Spin
Heavy
Normal
Handwash/
Wool
Items labeled
“hand washable”
Warm Low Light
Cold
Tap Cold
Medium
No Spin
Normal
Heavy
Workout
Wear
Permanent press,
synthetic items
Warm Medium Normal
Cold
Tap Cold
High
No Spin
Low
Heavy
Light
Rinse/Spin Rinse and Spin
Tap Cold High
Extra High
Medium
Low
No Spin
HOW TO USE
CYCLE GUIDE
The cycle guide below shows the default settings, available options and recommended fabric types
for each cycle. Allowable modier adjustments are shown below the default setting for each cycle.
= Default Setting
= Available Option
NOTE:
To protect your garments, not every wash temperature, spin speed, soil level, or option is available with every
cycle. A chime will sound and the LED will not light if the selection is not allowed.
*When a cycle is selected, the default time for that cycle is displayed. This time will change as modiers or options are
selected. Once the START/PAUSE button is pressed, the washer will measure the size of the load. The estimated time may
change once the load size has been measured. The washer automatically adjusts the wash time for the amount of laundry,
water pressure, water and other operating conditions.
These cycles use various wash motions to enhance cleaning and/or fabric care performance. The wash motions may sound
dierent at dierent stages of the wash cycle. This is normal.
NOTE:
To protect your garments, not every wash temperature, spin speed, soil level, or option is available with every
cycle. A chime will sound and the LED will not light if the selection is not allowed.
*When a cycle is selected, the default time for that cycle is displayed. This time will change as modiers or options are
selected. Once the START/PAUSE button is pressed, the washer will measure the size of the load. The estimated time may
change once the load size has been measured. The washer automatically adjusts the wash time for the amount of laundry,
water pressure, water and other operating conditions.
These cycles use various wash motions to enhance cleaning and/or fabric care performance. The wash motions may sound
dierent at dierent stages of the wash cycle. This is normal.