Kenmore 796.3152#21 - Cycle Guide

14
HOW TO USE
CYCLE GUIDE
The cycle guide below shows the default settings, available options and recommended fabric types
for each cycle. Allowable modier adjustments are shown below the default setting for each cycle.
= Default Setting
Cycle
Fabric or
Load Type
Wash
Temperature
Spin
Speed
Soil Level
Stain
Treat
Save
Energy
Extra
Rinse
Water
Plus
Add a
Garment
Normal/
Casual
Cotton, shirts, jeans,
socks, pants
Warm High Normal
Hot
Cold
Tap Cold
Extra High
No Spin
Medium
Heavy
Light
Bulky/
Bedding
Large items such
as blankets and
comforters
Warm Medium Normal
Cold
Hot
Tap Cold
Extra High
High
No Spin
Low
Heavy
Light
Kids Wear
Specically
designed to clean
and thoroughly rinse
kids wear
Warm High Light
Hot
Cold
Extra High
No Spin
Low
Medium
Normal
Heavy
Towels Towels
Warm High Normal
Cold
Hot
Tap Cold
Extra
High
No Spin
Low
Medium
Heavy
Light
Colors
Lightly soiled and
colored clothing
Tap Cold Medium Normal
Cold
Warm
High
Extra
High
No Spin
Low
Heavy
Light
Heavy
Duty
Heavy soiled
cotton fabrics
Warm High Heavy
Cold
Hot
Tap Cold
Extra High
Medium
Low
No Spin
Light
Normal
= Available Option
NOTE:
To protect your garments, not every wash temperature, spin speed, soil level, or option is available with every
cycle. A chime will sound and the LED will not light if the selection is not allowed.
*When a cycle is selected, the default time for that cycle is displayed. This time will change as modiers or options are
selected. Once the START/PAUSE button is pressed, the washer will measure the size of the load. The estimated time may
change once the load size has been measured. The washer automatically adjusts the wash time for the amount of laundry,
water pressure, water and other operating conditions.
These cycles use various wash motions to enhance cleaning and/or fabric care performance. The wash motions may sound
dierent at dierent stages of the wash cycle. This is normal.