To Next Page
J
Jason NelsonSep 13, 2025
What does E5 error mean on my Kenmore 796.8102 Dryer?
- MMark MurilloSep 14, 2025
The error E5 is only displayed in the test mode. If your Kenmore Dryer shows this error, you should replace the steam feeder pump.
What does E5 error mean on my Kenmore 796.8102 Dryer?
The error E5 is only displayed in the test mode. If your Kenmore Dryer shows this error, you should replace the steam feeder pump.
General| Brand | Kenmore |
|---|---|
| Model Number | 796.8102 |
| Color | White |
| Wrinkle Guard Option | Yes |
| Moisture Sensor | Yes |
| Power Source | Electric |
| Voltage | 240 V |
| Amperage | 30 A |
| Width | 27 inches |
| Dryer Venting | Vented |
Crucial safety guidelines including warnings, grounding, and gas handling.
Guidelines for handling sensitive electronic components to prevent ESD damage.
Detailed technical specifications including power, capacity, and dimensions.
Visual layout and features of the control panels for different models.
Steps for connecting the power cord using 3-wire and 4-wire configurations.
Procedure for connecting the gas supply pipe for gas dryers.
Default settings and conditions for various drying cycles.
Methods and expected results for testing key dryer components.
Diagrams illustrating motor operation modes and centrifugal switch.
Diagrams showing the layout of the Printed Circuit Board assemblies.
Electrical wiring diagrams for Electric and Gas dryer models.
Details on steam cycles, fabric types, and maximum load amounts.
Common problems and solutions related to steam dryer operation.
Fault codes displayed by the steam dryer and their causes.
Procedure to check the 120V AC electrical supply to the unit.
Steps to test the thermistor's resistance against temperature.
Procedure to test the motor's resistance and operation.
Functional and mechanical tests for the moisture sensing system.
Tests to verify the door switch and its related components.
Test procedure for the heater switch in electric dryer models.
Functional and mechanical tests for the gas valve system.
Steps to remove the dryer's top plate.
Procedure for disassembling the panel drawer.
Steps for disassembling the control panel.
Instructions for removing the dryer's cabinet cover.
Procedure to remove the guide assembly.
Steps to disassemble frame body and panel frame.
Instructions for disassembling the front tub drum.
Steps to remove the drum assembly and belt.
Procedure for replacing the drum lamp bulb.
Steps for changing the dryer exhaust duct.
Instructions for removing the filter assembly.
Steps to disassemble and remove the blower housing.
Procedure for removing the dryer's back cover.
Steps to remove the air duct.
Procedure for removing and replacing dryer rollers.
Exploded view of the control panel and associated parts.
Exploded view of the panel drawer and guide assemblies.
Exploded view of the cabinet and door assembly for gas models.
Exploded view of the drum and motor assembly for gas models.
