45
TROUBLESHOOTING
GLASS TRAY
TONES
DISPLAY MESSAGES
The glass tray will not
move.
PROBLEM CAUSE
• The glass tray is not correctly in place. It should be correct-side up and sitting
firmly on the center hub.
• The support is not operating correctly. Remove the glass tray and restart the
oven. If the hub still does not move, call Sears Service at 1-800-4-MY-HOME
®
.
Cooking without the glass tray can give you poor results.
You do not hear
the programming or
end-of-cycle tone.
PROBLEM CAUSE
• You have not entered the correct command.
The display is flashing “ : ”.
PROBLEM CAUSE
• There has been a power interruption. Reset the clock. (See the “ Clock ” section
on Page 16.)
If none of these items are causing your problem, call Sears Service at 1-800-4-MY-HOME
®
.
To Next Page